voltage limiter - определение. Что такое voltage limiter
DICLIB.COM
Языковые инструменты на ИИ
Введите слово или словосочетание на любом языке 👆
Язык:     

Перевод и анализ слов искусственным интеллектом

На этой странице Вы можете получить подробный анализ слова или словосочетания, произведенный с помощью лучшей на сегодняшний день технологии искусственного интеллекта:

  • как употребляется слово
  • частота употребления
  • используется оно чаще в устной или письменной речи
  • варианты перевода слова
  • примеры употребления (несколько фраз с переводом)
  • этимология

Что (кто) такое voltage limiter - определение

ELECTROACUSTIC DEVICE
Limiting; Limiter circuit; Audio limiter; Hard limiter
  • Comparison of soft and hard clipping.

Limiting         
·p.pr. & ·vb.n. of Limit.
Limiter         
·noun One who, or that which, limits.
II. Limiter ·noun A friar licensed to beg within certain bounds, or whose duty was limited to a certain district.
Cutoff voltage         
VOLTAGE AT WHICH A BATTERY IS CONSIDERED FULLY DISCHARGED, BEYOND WHICH FURTHER DISCHARGE COULD CAUSE HARM
Cut-off voltage; Low-voltage-cutoff
In electronics, the cut-off voltage is the voltage at which a battery is considered fully discharged, beyond which further discharge could cause harm. Some electronic devices, such as cell phones, will automatically shut down when the cut-off voltage has been reached.

Википедия

Limiter

In electronics, a limiter is a circuit that allows signals below a specified input power or level to pass unaffected while attenuating (lowering) the peaks of stronger signals that exceed this threshold. Limiting is a type of dynamic range compression. Clipping is an extreme version of limiting.

Limiting is any process by which the amplitude of a signal is prevented from exceeding a predetermined value.

Limiters are common as a safety device in live sound and broadcast applications to prevent sudden volume peaks from occurring. Limiters are also used as protective features in some components of sound reinforcement systems (e.g., powered mixing boards and power amplifiers) and in some bass amplifiers, to prevent unwanted distortion or loudspeaker damage.